1.Recover  moveability of piston ring.
2.Reduce emission of noxious gas.
3. Remove carbon deposit(erosion) on spark plug.
4.Balance cylinder pressure and reduce working noise of engine.
5. Clean various dirt things(cartbon deposit,coking,colloids) from cylinder,piston,combustor and air valve.

Specification：500ml×12
Code：B-1964
Shelf life：3 years
Executive Standard：Q/GZBCL 130

1.Preheat engine to make it be in warm condition,not hot condition.
2.Cut off ignition distributor,high-tension ignition coil and dismout spark plug.
Put it into breaker for soaking to dissolve carbon deposit.
3.Inject combustor cleaner into each cylinder stator through spray pipe(time for the process not exceeds 5 seconds),
after standing for 1 minute,use device to absorb residual liquid,cover cylinder port by using rag,use blower gun to dry combustor.
4.Repeat above-mentioned steps once again, use starting motor to start engine for several seconds, then use blower gun to dry combustor again.
5.Use blower gun to dry spark plug and install spark plug.
6. Start engine and work for 3 to 5 minutes with high-idling,so that it can empty inward residual cleaner in engine.
7. 1 to 2 bottles for vehicle whose carbon deposit is not removed, vat is less than six within 100 thousand kilometers;
2 bottles for vehicle which has vat more than.

The product  must be operated by professionals.
It is aqueous and not inflammable.Keep out of reach of children.
When new car without carobon deposit within 20 thousand kilometers or engine oil for engine,visceral herriation,driving computer breakdown,abnormal vehicle condition,it is not allowed for using the product.
A void moisture,store in cool place,avoid eating
.If it gets into eyes or mouth accidently,please go to a doctor immediately.